General, N.B. Reg. 91-191

Section 275

Inspection before commencement of work

Cite as General, N.B. Reg. 91-191, s. 275 · current to June 30, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) No employee shall commence a welding, cutting, burning or soldering operation unless the employee has thoroughly inspected the entire area surrounding the area around the operation to ensure that all combustible, flammable or explosive material, dust, gas or vapour has been removed from the area, if possible, or that adequate precautions have been taken to prevent fire or explosion. (2) An employer shall not permit any welding, cutting, burning or soldering operation until the precautions required by subsection (1) have been carried out. (3) Clause 11.7 of CSA standard W117.2-12 (R2017), “Safety in welding, cutting and allied processes” or a standard offering equivalent or better protection shall be used as a guide to establish suitable fire extinguishing measures and other fire prevention measures.
Read the General on the Province's website ↗

Made under Occupational Health and Safety Act, c. O-0.2.