General, N.B. Reg. 91-191

Section 245

Cutting or shaping machines

Cite as General, N.B. Reg. 91-191, s. 245 · current to June 30, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) In this section “push block” means a block of wood with a handle similar to that of a hand plane and with a shoulder at the rear, that is used to feed material into a machine and is of sufficient length to protect an employee from coming into contact with the machine; (bloc poussoir) “push stick” means a narrow strip of wood or other soft material with a notch cut into one end that is used to feed material into a machine and is of sufficient length to protect an employee from coming into contact with the machine. (poussoir) (2) Where there may be a danger of injury to an employee’s hand from a cutting or shaping machine, an employer shall provide and the employee shall use a push block, push stick or other adequate protective device.
Read the General on the Province's website ↗

Made under Occupational Health and Safety Act, c. O-0.2.