General, N.B. Reg. 91-191
Section 242
Safeguards
Cite as General, N.B. Reg. 91-191, s. 242 · current to June 30, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026
The text
(1) Where an employee may come into contact with moving drive or idler belts, rollers, gears, driveshafts, keyways, pulleys, sprockets, chains, ropes, spindles, drums, counterweights, flywheels, couplings, pinchpoints, cutting edges or other moving parts on a machine that may be hazardous to the employee, an employer shall provide adequate safeguards to prevent such contact.
(2) Subsection (1) does not apply to a machine that is equipped with a device that stops the machine automatically before an employee comes into contact with the parts mentioned in subsection (1).
(3) Where there is a possibility of a failure of a machine that may result in an injury to an employee from a flying object, an employer shall install a safeguard strong enough to contain or deflect any flying object.
(4) No employer or employee shall alter the design of a machine where it has been designed with a safeguard that interlocks with the machinery control so as to prevent the operation of the machine unless the safeguard is in its proper place.
(5) Where an employer has determined that an adequate safeguard for a machine cannot be provided, the employer shall ensure that a physical modification of the machine is carried out or a change in work procedure is put into place to protect employees from being exposed to the hazards associated with the lack of an adequate safeguard.
Read the General on the Province's website ↗
Made under Occupational Health and Safety Act, c. O-0.2.