General, N.B. Reg. 91-191

Section 207

General requirements

Cite as General, N.B. Reg. 91-191, s. 207 · current to June 30, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) An employer shall ensure that a hoisting apparatus is (a) sufficiently strong and stable for the intended lift, and (b) equipped with suitable ropes, chains, slings, hooks and other fittings, so as to ensure the safety of a person who uses the apparatus or works in its vicinity. (1.1) An employer shall ensure that a competent person carries out the rigging of materials that are to be hoisted by a hoisting apparatus. (2) An employer and an operator of a hoisting apparatus shall each ensure that the hoisting apparatus is erected, installed, assembled, started, operated, used, handled, stored, stopped, serviced, tested, cleaned, adjusted, maintained, repaired, inspected and dismantled in accordance with the manufacturer’s specifications and the following CSA standards, if applicable: (a) B167-08 (R2015), “Overhead travelling cranes – Design, inspection, testing, maintenance, and safe operation” or a standard offering equivalent or better protection; (b) C22.2 No. 33-M1984 (R2014), “Construction and Test of Electric Cranes and Hoists” or a standard offering equivalent or better protection; (c) Z248-04 (R2014), “Code for Tower Cranes” or a standard offering equivalent or better protection; and (d) Z150-20, “Safety code on mobile cranes” or a standard offering equivalent or better protection. (3) Subsection (2) applies with the necessary modifications to a person who owns a hoisting apparatus.
Read the General on the Province's website ↗

Made under Occupational Health and Safety Act, c. O-0.2.