General, N.B. Reg. 91-191

Section 182

Entering excavation or trench

Cite as General, N.B. Reg. 91-191, s. 182 · current to June 30, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) An employer shall ensure that an employee does not, and no employee shall, enter an excavation or trench 1.2 m or more in depth unless (a) the walls of the excavation or trench are supported by shoring, bracing or caging, the excavation or trench is cut in solid rock or the excavation or trench is sloped or benched to within 1.2 m of the bottom of the excavation or trench with the slope not exceeding 1 m of vertical rise to each 1 m of horizontal run, (b) subsections 181(2), (3) and (4) have been complied with, (c) loose material that may fall into the excavation or trench has been removed, and (d) a ladder that extends at least 1 m above the excavation or trench is installed no more than 15 m from where the employee is working or some other safe means of access and egress is provided. (2) Notwithstanding subsection (1), an employee may enter an excavation 1.2 m or more in depth to install bracing if the employee remains a distance from the face of the excavation equal to or greater than the depth of the excavation. (3) Notwithstanding subsection (1), an employer shall ensure that an employee does not, and no employee shall, enter an excavation or trench 1.2 m or more in depth to install or remove shoring or caging from a position inside an excavation or a trench.
Read the General on the Province's website ↗

Made under Occupational Health and Safety Act, c. O-0.2.