General, N.B. Reg. 91-191
Section 156
Handling of explosives and related matters
Cite as General, N.B. Reg. 91-191, s. 156 · current to June 30, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026
The text
A blaster shall ensure that
(a) blasting explosives and detonator products are kept and handled separately until the last practicable moment when the blaster primes the explosive;
(b) no explosive is primed in any place where explosives are stored;
(c) primed explosives are not slit or tamped;
(d) the wrapping is not removed from nitroglycerine-based products;
(e) Repealed: 2024-38
(f) Repealed: 2024-38
(g) time expired, deteriorated or damaged explosives are not used;
(h) Repealed: 2024-38
(i) where there is any danger to property or persons from flyrock from a blast, blasting mats of adequate size and strength are used;
(j) frozen explosives are used in accordance with the manufacturer’s recommended procedure;
(k) drill holes are of sufficient size to admit the free insertion to the bottom of the hole of the explosive to be used without ramming, pounding or undue pressure;
(l) only tamping rods of wood or other non-metallic, non-sparking material are used;
(m) drill holes are not tied in until the last practicable moment before firing and are fired in a single operation;
(n) no drilling is done in a previously blasted area until the surface to be drilled is exposed and carefully examined for remnants of explosives or holes containing explosives; and
(o) where remnants of explosives or holes containing explosives are found, the explosives are detonated or removed before drilling commences.
Read the General on the Province's website ↗
Made under Occupational Health and Safety Act, c. O-0.2.