General, N.B. Reg. 91-191

Section 132

Sawn lumber planks

Cite as General, N.B. Reg. 91-191, s. 132 · current to June 30, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

An employer and a contractor shall each ensure that a sawn lumber plank in a scaffold (a) is at least 50 mm thick by 250 mm wide rough sawn lumber, (a.1) is made of No. 2 grade or better spruce, pine or fir, (a.2) is not painted other than by being preserved with a transparent protective coating, (a.3) is inspected by a competent person before each use to determine the integrity of the plank, (b) has a span not longer than 3 m, (c) extends at least 150 mm and not more than 300 mm beyond a supporting member, (d) is laid flat with an overlap of 300 mm with another plank, with the centre of the overlap directly over a bearer, and (e) is secured to prevent movement in any direction that may create a danger to an employee.
Read the General on the Province's website ↗

Made under Occupational Health and Safety Act, c. O-0.2.