Petroleum Product Storage and Handling, N.B. Reg. 87-97

Section 30

Cite as Petroleum Product Storage and Handling, N.B. Reg. 87-97, s. 30 · current to June 13, 2012 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) An applicant who has been granted a site approval under paragraph 29(1)(a) shall submit to the Minister (a) an application for an environmental approval on a form provided by the Minister, (b) the design referred to in paragraph 29(1)(a), and (c) copies of any studies or reports relevant to the application. (2) After considering the application and other material submitted by the applicant under subsection (1) and any other information submitted to the Minister, the Minister may issue an environmental approval in Form 2, which may be subject to such terms and conditions as the Minister may require, including, without restricting the foregoing: (a) requiring changes in the design, construction, components, manner of installation, capacity or operation of the proposed system or site, including the requirement that the system meet standards more stringent than those required in this Regulation; (b) requiring that a system be fitted with one or more automatic leak detection systems, monitoring devices or monitoring wells; (c) requiring the applicant to file with the Minister engineering plans that comply with subsection 26(2); (d) providing for an expiry date of twelve months or less; (e) requiring the regular reporting of the names, mailing addresses, residential addresses and telephone numbers of all persons in charge of the operation of the system; (f) requiring the applicant to notify the Minister of the commencement of backfilling of the system at least three days in advance; and (g) requiring the applicant to obtain a licence before commencing operations. (3) An environmental approval shall be issued within a reasonable time in the name of the applicant and is not transferrable except in accordance with section 31. (4) An environmental approval is valid only for the work described in the approval. (5) The issue to an applicant of an environmental approval does not supplant any requirement imposed upon the applicant or upon the work to be done by the Act, this Regulation or any other legislation. (6) The holder of an environmental approval shall (a) ensure that the work done on an installation complies with section 35, all other provisions of the Act and this Regulation and all other applicable legislation, and (b) notify the Minister at least three full business days before starting the work on the system.
Read the Petroleum Product Storage and Handling on the Province's website ↗

Made under Clean Environment Act, c. C-6.