Petroleum Product Storage and Handling, N.B. Reg. 87-97
Section 103
Cite as Petroleum Product Storage and Handling, N.B. Reg. 87-97, s. 103 · current to June 13, 2012 · read from New Brunswick Acts and Regulations on November 16, 2026
The text
(1) Subject to subsection (2), a steel storage tank shall be supported on clean compacted sand at least one hundred and fifty millimetres deep and shall be backfilled on all sides including the top with at least three hundred millimetres of clean sand that is free of clay, cinders, stones and any foreign matter and that is compacted in layers not greater than three hundred millimetres thick.
(2) Where acceptable to the Minister, grade B gravel, stone dust or screenings may be substituted for the sand required under subsection (1).
(3) An underground plastic storage tank shall be supported on pea gravel or clean crushed stone at least three hundred millimetres deep and shall be backfilled on all sides including the top with at least three hundred millimetres of pea gravel or clean crushed stone that is free of any foreign matter.
(4) A steel underground storage tank shall not be placed in direct contact with a reinforced concrete anchor slab but shall be separated by a minimum of one hundred and fifty millimetres of compacted sand or other suitable material to distribute evenly the mass of the tank on the supporting base.
Read the Petroleum Product Storage and Handling on the Province's website ↗
Made under Clean Environment Act, c. C-6.