Boiler and Pressure Vessel Code, N.B. Reg. 84-174
Section 512
SYMBOL AND STAMPING OF WORK
Cite as Boiler and Pressure Vessel Code, N.B. Reg. 84-174, s. 512 · current to August 1, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026
The text
(1) Every welder qualified under this Regulation to perform welding on boilers, pressure vessels or pressure piping systems shall be assigned a symbol by the Department at the time of the issuing of his welder’s certificate and the welder shall stamp his symbol upon all his work in the following manner:
(a) on new work, at intervals of three feet (one metre) along all seams and joints and on each separate weld; and
(b) on repair work, at intervals of twelve inches (three hundred millimetres) along all seams and joints and on each separate weld.
(2) Repealed: 2014-96
Read the Boiler and Pressure Vessel Code on the Province's website ↗
Made under Boiler and Pressure Vessel Act, 2011, c.122.