Boiler and Pressure Vessel Code, N.B. Reg. 84-174
Section 401
DRAWINGS AND SPECIFICATIONS
Cite as Boiler and Pressure Vessel Code, N.B. Reg. 84-174, s. 401 · current to August 1, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026
The text
(1) The design for any fitting to be used on boilers, pressure vessels or pressure piping systems shall be registered with the Chief Inspector before the fitting is used.
(2) Subject to subsection (3), the design for fittings to be used on boilers, pressure vessels or pressure piping systems
(a) shall conform to the requirements of the applicable standards prescribed in the Standards Regulation - Boiler and Pressure Vessel Act, and
(b) may be submitted for registration
(i) directly to the Chief Inspector, or
(ii) to the Chief Inspector through a design review organization approved by the Chief Inspector.
(3) The design for fittings to be used for nuclear service
(a) shall conform to the requirements of CSA N285.0, and
(b) may be submitted for registration
(i) directly to the Chief Inspector, or
(ii) to the Chief Inspector through a design review organization approved by the Chief Inspector.
(4) Subject to subsection (5), designs for fittings may be registered collectively by category.
(5) The design for safety valves and specially designed fittings shall be registered individually.
(6) All submissions for registration of designs for fittings shall include a statutory declaration executed by the manufacturer of the fittings, on the form provided by the Department.
Read the Boiler and Pressure Vessel Code on the Province's website ↗
Made under Boiler and Pressure Vessel Act, 2011, c.122.