Boiler and Pressure Vessel Code, N.B. Reg. 84-174

Section 316

SHOP INSPECTION

Cite as Boiler and Pressure Vessel Code, N.B. Reg. 84-174, s. 316 · current to August 1, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) Where a boiler, pressure vessel or pressure piping system is manufactured in New Brunswick, it shall be shop inspected by a boiler inspector during its manufacture. (2) Where a boiler, pressure vessel or pressure piping system is manufactured outside New Brunswick in any province in Canada for use in New Brunswick, the Chief Inspector may arrange with the regulatory authority of the province of manufacture to carry out shop inspections of the boiler, pressure vessel or pressure piping system during its manufacture by an inspector authorized by the Chief Inspector who may accept the inspection reports submitted to the Chief Inspector by such inspector for the purposes of this Regulation. (3) Where a boiler, pressure vessel or pressure piping system is manufactured outside Canada for use in New Brunswick, the Chief Inspector may authorize an agency to carry out shop inspections of the boiler, pressure vessel or pressure piping system during its manufacture and may accept the inspection reports submitted to the Chief Inspector by such agency for the purposes of this Regulation. (4) Where a boiler or pressure vessel is shop inspected under this section, the Chief Inspector may, if the inspector or agency doing the inspection is satisfied that the boiler or pressure vessel may be used safely, issue a certificate of inspection in respect of the boiler or pressure vessel.
Read the Boiler and Pressure Vessel Code on the Province's website ↗

Made under Boiler and Pressure Vessel Act, 2011, c.122.