Christmas Trees, N.B. Reg. 84-158
Section 7
Cite as Christmas Trees, N.B. Reg. 84-158, s. 7 · current to June 30, 2000 · read from New Brunswick Acts and Regulations on November 16, 2026
The text
(1) Density is the amount of foliage on a tree and for grading purposes is classified as follows:
(a) “heavy density” applies to trees with the following characteristics:
(i) the whorls or branches are relatively close together and the spaces between the whorls or branches are so filled with twigs that eighty to one hundred percent of the main stem is generally invisible; and
(ii) the needle population and growth are adequate to cover the branches;
(b) “medium density” applies to trees with the following characteristics:
(i) the whorls or branches are reasonably close together and the spaces between the whorls or branches are so filled with twigs that sixty to eighty percent of the main stem is generally invisible; and
(ii) the needle population and growth are adequate to cover the branches; and
(c) “light density” applies to trees with the following characteristics:
(i) the whorls or branches are reasonably spaced and the spaces between the whorls or branches are only partially filled so that forty to sixty percent of the main stem is generally invisible; and
(ii) the needle population and growth are adequate to reasonably cover the branches.
(2) Taper is the relationship of the width of the tree at its lowest branches to the height of the tree.
(3) The balance of a tree is determined as follows:
(a) by considering a tree to have four faces, each encompassing one quarter section of the tree, and by inspecting each face for completeness and defects in the process of grading; and
(b) by assessing the tree shape, applying the term “well-shaped” to a tree having branches of sufficient number and length to form a circular outline tapering from the lowest whorl of branches to the top, with the main stem at the centre.
(4) Foliage is assessed under the following terms:
(a) “fresh”, when the needles are green, crisp and firmly attached;
(b) “clean”, where the tree is almost free of foreign material;
(c) Repealed: 86-110
(d) “healthy”, when the needles have a fresh natural appearance characteristic of the species.
(5) For grading purposes:
(a) “defects” includes the lack of some part of the tree necessary to its perfection or the presence of extraneous parts or of foreign material which detracts from its appearance; and
(b) “minor defects” means slight imperfections in the development of the tree or as a result of handling which do not seriously affect the appearance of the tree and are identified as:
(i) slight uneven density;
(ii) slight visible crook in the main stem;
(iii) partially visible multiple main stem;
(iv) small open hole;
(v) slight physical damage;
(vi) slight insect damage;
(vii) multiple leader;
(viii) weak lower whorl or lower branches;
(ix) Repealed: 86-110
(x) broken branch; and
(xi) extra long branch.
(6) Defects in excess of minor defects that appear on more than one face shall exclude a tree from any grade.
(7) The tree handle shall be free of branches below the bottom whorl and smoothly cut at approximate right angles to the trunk of the tree and unless otherwise specified, the handle shall be not less than fifteen centimetres in length and not longer than four and one-half centimetres for each thirty centimetres of tree height.
(8) Tree height is the distance from the base of the handle to the top of the main leader, excluding that portion of the leader that extends more than ten centimetres above the apex of the cone of the taper applicable to the tree.
(9) The factors set forth in this section apply in the grading of all species of trees with due consideration for the natural characteristics of the various species.
Read the Christmas Trees on the Province's website ↗