General, N.B. Reg. 83-42
Section 40.1
Tire standards for motorcycles
Cite as General, N.B. Reg. 83-42, s. 40.1 · current to August 1, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026
The text
(1) For the purpose of subsection 229.1(1) of the Act, the minimum tread depth for a motorcycle tire is at least 1.6 mm (1/16 in.) of tread remaining when measured in any major tread groove on the tire.
(2) The following motorcycle tire conditions are prescribed for the purpose of subsection 229.1(2) of the Act:
(a) any cracks, cuts, scuffs or snags in excess of 2.54 cm (1 in.) that expose body cords in the tread area;
(b) any cracks, cuts, scuffs or snags in the sidewall of the tire to the extent that body cords are damaged or exposed;
(c) any bumps, bulges or lumps indicating separation of the tread, sidewall or bead area;
(d) a noticeable air leak;
(e) tread no longer evident in cupped area;
(f) visible breaks, boots, blowout patches;
(g) a repair consisting of a plug in the tire sidewall; and
(h) any markings indicating that the tire is not for highway use.
Read the General on the Province's website ↗
Made under Motor Vehicle Act, c. M-17.