General, N.B. Reg. 83-190

Section 54

Cite as General, N.B. Reg. 83-190, s. 54 · current to May 15, 2018 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) Subject to subsection (2), when scaling primary forest products in cubic metres, a scaler shall (a) count all pieces in a pile and mark the pieces so as to be readily identifiable, except in the case of primary forest products in transit; (b) measure the diameter of each piece in a pile through the geometric centre of the piece. (2) A scaler shall scale logs by measuring the smallest top diameter inside bark in 2-cm units and the length in 0.2-m units. (3) A scaler shall determine the volume of softwood logs from the table contained in Appendix H. (4) A scaler shall determine the volume of hardwood logs from the table contained in Appendix I. (5) Logs that are longer than a specified length class shall be scaled as belonging to the next larger length class, unless otherwise specified in a contract. (6) A scaler shall scale weir stakes, poles, posts and pilings by measuring the smallest top diameter in 2-cm units and the length in 0.6-m units, and using those measurements shall determine the volume of weir stakes and spruce, tamarack, jack pine, red pine poles, posts and pilings from the table contained in Appendix J and the volume of cedar poles and posts from the table contained in Appendix K.
Read the General on the Province's website ↗

Made under Scalers Act, 2011, c.219.