General, N.B. Reg. 83-190

Section 40

Cite as General, N.B. Reg. 83-190, s. 40 · current to May 15, 2018 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) In this section “specified length” means the length of the primary forest product as specified in a contract. (2) Where a pile of primary forest products, other than bolts to be converted into lumber, is scaled in stacked cubic metres, the width of the pile is the average length of the bolts in the pile. (3) A scaler shall determine the average length of bolts in a pile by measuring as many bolts as are necessary until satisfied that the average of such measurements is representative of the actual pile width. (4) When determining the width of a pile of primary forest products that are to be converted into lumber and to be scaled in stacked cubic metres, a scaler shall accept the allowance fixed by the specifications in the contract respecting the primary forest product. (5) Where the allowance in subsection (4) is exceeded, a scaler shall record the amount of the excess and the width of that pile shall be the sum of the specified length and the amount of the excess beyond the allowance referred to in subsection (4).
Read the General on the Province's website ↗

Made under Scalers Act, 2011, c.219.