General, N.B. Reg. 83-190

Section 2

Cite as General, N.B. Reg. 83-190, s. 2 · current to May 15, 2018 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) In this Regulation “accuracy” means the degree to which individual measurements are in agreement with an accepted reference value when taken under similar conditions; (exactitude) “Act” means the Scalers Act; (Loi) “bolt” means any primary forest product equal to or shorter than the 2.60 - m class; (billot) “check scale” means a scale used as a standard for comparing the scaling of scalers for the purposes of maintaining a uniform level of scaling practices and providing a control over human error associated with scaling; (mesurage de vérification) “contract” means a contract entered into between a Producer Association and a forest industry with respect to the purchase of primary forest products; (contrat) “foreign material” means any material extraneous to primary forest products such as earth, ice, snow and branches, any of which add mass to a load of primary forest products; (matière étrangère) “fuelwood” Repealed: 86-163 “licensee” means the holder of a Crown timber license and includes the holder’s executors, administrators, successors, heirs and assigns; (titulaire de permis) “log” Repealed: 95-63 “mass” means the property of a body that is a measure of its inertia and that is commonly taken as a measure of the amount of material that it contains and that causes it to have weight in a gravitational field; (masse) “precision” means the degree of similarity among a series of measurements taken under similar conditions; (précision) “timber license” means a Crown timber license within the meaning of the Crown Lands and Forests Act; (permis de coupe) “void” means an unnecessary space in a pile of primary forest products, large enough to accommodate at least the equivalent volume of the average bolt in the pile; (espace vide) “wood processing facility” means a mill in which primary forest products are manufactured into secondary wood products. (établissement de transformation du bois) (2) In this Regulation “cm” means centimetre; “fbm” Repealed: 95-10 “kg” means kilogram; “m” means metre; “mm” means millimetre; “m3” means cubic metre; “m3(st)” means stacked cubic metre; “m3/m3(st)” means cubic metre per stacked cubic metre; “t” means tonne(s) or 1000 kg; “>” means greater than; “≤” means equal to or less than; “=” means is equal to; or “=” means equals. (3) For the purposes of this Regulation (a) length measurements of pulpwood are divided into 0.02-m units with the boundary between units on the odd number as illustrated below: 2.44-m class = > 2.43 – ≤ 2.45 2.46-m class = > 2.45 – ≤ 2.47 2.60-m class = > 2.59 – ≤ 2.61 (b) length measurements for logs are divided into 0.20-m units with the boundary between units on the odd number as illustrated below: 2.8-m class = > 2.7 – ≤ 2.9 3.2-m class = > 3.1 – ≤ 3.3 3.4-m class = > 3.3 – ≤ 3.5 (c) length measurements for poles, posts and pilings are divided into 0.6-m units with the boundary between units on the odd number as illustrated below: 7.0-m class = > 6.7 – ≤ 7.3 7.6-m class = > 7.3 – ≤ 7.9 8.2-m class = > 7.9 – ≤ 8.5 (d) length estimates for defects are divided into 0.5-m units with the boundary between units on the odd number as illustrated below: 0.5-m class = > 0.25 – ≤ 0.75 1.0-m class = > 0.75 – ≤ 1.25 1.5-m class = > 1.25 – ≤ 1.75 (4) For the purposes of this Regulation, diameter measurements are divided into 2-cm units with the boundary between units on the odd numbers as illustrated below: 10-cm class = > 9 – ≤ 11 12-cm class = > 11 – ≤ 13 14-cm class = > 13 – ≤ 15 (5) Repealed: 2014-19
Read the General on the Province's website ↗

Made under Scalers Act, 2011, c.219.