General, N.B. Reg. 82-81

Section 2.3

Cite as General, N.B. Reg. 82-81, s. 2.3 · current to December 13, 2024 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) Marking or colouring motive fuel shall be effected (a) by adding to the motive fuel a mixture composed of one part of marker or colouring, containing a red tincture, a tracer and aromatic solvents, and 12 parts of motive fuel, in a proportion of 182 litres of the mixture for each million litres of motive fuel, or (b) by adding to the motive fuel a marker or colouring, containing a red tincture, a tracer and aromatic solvents, in a proportion of 14 litres of marker or colouring for each million litres of motive fuel. (2) Where motive fuel is marked or coloured in accordance with subsection (8), marking or colouring shall be effected in accordance with paragraph (1)(a). (3) Repealed: 2004-92 (4) Where motive fuel to be marked or coloured is refined in the Province, the marking or colouring shall be effected during the storage of the motive fuel in the tanks of the refinery, of an oil pipeline terminal, or of a marine terminal operated by the holder of the marking authorization permit, or during the delivery of the motive fuel to the loading station of the refinery, of an oil pipeline terminal, or of a marine terminal operated by the holder of the marking authorization permit. (5) Where motive fuel to be marked or coloured is imported into the Province and is already refined, the marking or colouring shall be effected during the storage of the motive fuel in the importer’s tanks, or at the loading racks of a marine terminal operated by the importer, unless the marking or colouring of such motive fuel was done in accordance with this Regulation before being imported. (6) Where motive fuel referred to in subsection (5) is not stored in the importer’s tanks, marking or colouring shall be effected before or on its entry into the Province. (7) Except as otherwise provided in this section, marking or colouring motive fuel shall be effected by means of an injector on the premises of a bulk plant or by a mobile injector as approved by the Minister. (8) Marking or colouring at tank truck loading racks shall be effected by means of an injection system equipped with an automatic cut-off device designed to prevent the delivery of motive fuel that is not marked or coloured in case of a defect in the system. (9) The motive fuel delivery system at tank truck loading racks shall comprise separate loading spouts for motive fuel marked or coloured in accordance with paragraph (1)(a) and motive fuel that is not marked or coloured, and each spout shall be equipped with a meter. (10) Notwithstanding subsection (9), a motive fuel delivery system may include only one loading spout for motive fuel marked or coloured in accordance with paragraph (1)(a) and motive fuel that is not marked or coloured, where it meets the following conditions: (a) the loading spout shall be designed or equipped so that it may be cleaned by means of a sufficient quantity of non-marked or non-coloured motive fuel at the end of each delivery of motive fuel and it shall be used for the delivery of motive fuel only; and (b) the delivery system shall be equipped with a meter that allows deliveries of marked or coloured motive fuel to be distinguished from deliveries of non-marked or non-coloured motive fuel. (11) Repealed: 2014-137 (12) The marker or colouring referred to in paragraph (1)(b) shall be kept at all times at a temperature higher than -20 °C. (13) Repealed: 2004-92
Read the General on the Province's website ↗

Made under Gasoline and Motive Fuel Tax Act, c. G-3.