Workplace Hazardous Materials Information System, N.B. Reg. 2016-6

Section 13

Laboratory labels

Cite as Workplace Hazardous Materials Information System, N.B. Reg. 2016-6, s. 13 · current to April 1, 2016 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) If a laboratory sample of a hazardous product is the subject of a labelling exemption under subsection 5(5) or (6) of the Hazardous Products Regulations, a label provided by the supplier and affixed to, printed on or attached to the container of the product received at the place of employment that discloses the following information in place of the information required under paragraphs 3(1)(c) or (d) of the Hazardous Products Regulations complies with the requirements of section 8 with respect to a supplier label: (a) the chemical name or generic chemical name of any material or substance in the hazardous product that, individually, is classified pursuant to the Hazardous Products Act and the Hazardous Products Regulations in any category or subcategory of a health hazard class and is present above the relevant concentration limit, or is present at a concentration that results in the mixture being classified in a category or subcategory of any health hazard class, if known by the supplier; and (b) the statement “Hazardous Laboratory Sample. For hazard information or in an emergency, call / Échantillon pour laboratoire de produit dangereux. Pour obtenir des renseignements sur les dangers ou en cas d’urgence, composez” followed by an emergency telephone number for the purpose of obtaining the information that must be provided on the safety data sheet of the hazardous product. (2) If a hazardous product is in a container, other than the container in which it was received from a supplier, or is produced in the place of employment, the employer is exempt from the requirement of section 10 if the hazardous product (a) is a laboratory sample; (b) is intended by the employer solely for use, analysis, testing or evaluation in a laboratory, and (c) is clearly identified through a combination of (i) a mode of identification visible to employees at the place of employment, and (ii) employee education, instruction and training required by this Regulation. (3) The employer shall ensure that the mode of identification and employee education, instruction and training used under subsection (2) enables the employees to readily identify and obtain either the information required on a safety data sheet, if one has been produced, or a label or document disclosing the information referred to in paragraphs (1)(a) and (b) with respect to the hazardous product or the sample. (4) If a hazardous product is produced in a laboratory, the employer is exempt from the requirements of sections 9 and 10 if the hazardous product (a) is intended by the employer solely for evaluation, analysis or testing for research and development, (b) is not removed from the laboratory, and (c) is clearly identified through a combination of (i) any mode of identification visible to employees at the place of employment, and (ii) employee education, instruction and training required by this Regulation. (5) The employer shall ensure that the mode of identification and employee education, instruction and training used under subsection (4) enables employees to readily identify and obtain either the information required on a safety data sheet, if one has been produced, or any other information that is necessary to ensure the safe use, storage and handling of the hazardous product.
Read the Workplace Hazardous Materials Information System on the Province's website ↗

Made under Occupational Health and Safety Act, c. O-0.2.