Safety Code for Elevating Devices and Amusement Devices, N.B. Reg. 2014-147

Section 67

Construction of hoistways and hoistway enclosures

Cite as Safety Code for Elevating Devices and Amusement Devices, N.B. Reg. 2014-147, s. 67 · current to August 1, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) Except at the landing openings, every elevator hoistway shall be fully enclosed with an unperforated material. (2) Openwork enclosures may be used above the six foot level, provided that any opening in the openwork enclosure rejects a ball one inch in diameter, but any part of the enclosure within four inches of the counterweight runway shall be solid. (3) Openwork enclosures may be constructed of (a) steel wire grille or expanded metal which shall be at least No. 13 U.S. wire gauge, or (b) wood slats which shall be mounted vertically and at least one inch thick. (4) The entire hoistway facing the car entrance shall be sheathed with a substantial smooth material to the satisfaction of the Chief Inspector, including proper toe guards if required.
Read the Safety Code for Elevating Devices and Amusement Devices on the Province's website ↗

Made under Elevators and Lifts Act, c. E-6.