Safety Code for Elevating Devices and Amusement Devices, N.B. Reg. 2014-147

Section 47

Rope lays and rope replacement

Cite as Safety Code for Elevating Devices and Amusement Devices, N.B. Reg. 2014-147, s. 47 · current to August 1, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) The inspection of ropes is determined by the number of broken wires in a rope lay or the loss of rope diameter. (2) A rope lay is one complete turn of a rope strand around the rope core. (3) In rope length a rope lay is approximately 3 ¼″ for ½″ rope, 3 ⅝″ for 9/16″ rope, 4 1/16″ for ⅝″ rope, 4 ½″ for 11/16″ rope, and 4 ⅞″ for ¾″ rope. (4) Hoisting and counterweight ropes shall be replaced when conditions are equal to or in excess of those given in the following tables: DISTRIBUTED BREAKS IN A ROPE LAY Drum Machines | Traction Machines (6 × 19) 12 breaks any rope | 24 breaks | (6 × 21) | ropes (6 × 25) (8 × 19) 32 breaks | (8 × 21) | ropes (8 × 25) UNEQUAL OR BROKEN WIRE IN ONE OR TWO STRANDS IN A ROPE LAY Drum Machines | Traction Machines (6 × 19) 8 breaks any rope | 8 breaks | (6 × 21) | ropes (6 × 25) (8 × 19) 10 breaks | (8 × 21) | ropes (8 × 25) LOSS OF ROPE DIAMETER Size of Rope | Loss of Diameter 1/2″ | 1/32″ 9/16″ | 1/32″ 5/8″ | 3/64″ 11/16″ | 3/64″ 3/4″ | 3/64″ 1″ | 1/16″ CORROSION (RUST, RED DUST, ROUGE) For corrosion, replace ropes if broken wires exceed 50% of the above values.
Read the Safety Code for Elevating Devices and Amusement Devices on the Province's website ↗

Made under Elevators and Lifts Act, c. E-6.