Safety Code for Elevating Devices and Amusement Devices, N.B. Reg. 2014-147
Section 39
Final terminal stopping devices
Cite as Safety Code for Elevating Devices and Amusement Devices, N.B. Reg. 2014-147, s. 39 · current to August 1, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026
The text
(1) Every elevator shall have a final terminal stopping device to prevent the car from over-running its safe limits of travel.
(2) A final terminal stopping device of an electric elevator
(a) operated by a hand rope or similar device shall prevent the operating device from causing the car or counterweight to continue in the same direction as when the final terminal stopping device was engaged, or
(b) not operated by a hand rope or similar device shall prevent the operating device from causing the car or the counterweight to move in either direction.
(3) The operation of the final terminal stopping device of an elevator shall cause the brake on the machine to automatically apply.
(4) The normal and final terminal stopping device shall not control the same controller switches unless two or more separate and independent switches are provided, two of which shall be closed to complete the driving machine motor and brake circuit in either direction of travel.
(5) If a two or three phase alternating current driving machine motor is used, these switches shall be of the multipole type.
(6) The control circuit shall be designed and installed so a single ground or short circuit may prevent either the normal or final stopping devices from stopping the car, but it shall not prevent both.
(7) An elevator provided with a winding-drum machine shall be provided with a final stopping device, a stop motion switch, that
(a) automatically opens the main current supply circuit to the elevator motor, and
(b) automatically applies the electric brake.
Read the Safety Code for Elevating Devices and Amusement Devices on the Province's website ↗
Made under Elevators and Lifts Act, c. E-6.