Air Space Act, 2011, c.109

Section 4

Requirements of air space plan

Cite as Air Space Act, 2011, c.109, s. 4 · current to January 1, 2018 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

An air space plan shall (a) identify the parcel of land of which the air space parcel is part and shall indicate that the plan is a subdivision of the whole or part of that parcel of land, (b) have its side boundary limits consist of vertical or inclined surfaces conforming to or lying within the boundaries of the parcel of land referred to in paragraph (a), (c) have as its upper and lower limit a horizontal or inclined plane or arc of a circle, or combination of them, (d) have noted on it the orthometric height of one corner of the ground surface of the parcel of land referred to in paragraph (a) and the orthometric height of every corner or angle of the air space parcel, and (e) include (i) a plot to scale of the parcel of land referred to in paragraph (a), and (ii) a three-dimensional paraline drawing of the air space parcel contained between the planes or arcs, and, if the surfaces of the air space parcel are both horizontal and vertical the plan shall so state, otherwise all boundaries of the air space parcel shall be fully dimensioned for length and direction.
Read the Air Space Act on the Province's website ↗