Milk Quality, N.B. Reg. 2010-19

Section 31

Milk truck

Cite as Milk Quality, N.B. Reg. 2010-19, s. 31 · current to January 30, 2023 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

A transporter shall not transport raw milk in a milk truck unless the milk truck (a) has been inspected and approved by an inspector, (b) is in good mechanical condition, and (c) is equipped with (i) a milk tank (A) that has a smooth inside lining, and all parts of the inside lining that come in contact with raw milk shall be made of stainless steel, be free from cracks, rough welds, rough solder or open seams and be resistant to damage from cleansers and sanitizers, (B) that is insulated in a manner such that the temperature of the raw milk cannot rise more than 2°C in 24 hours, and (C) that has an outer wall that is durable, smooth, non-corrodible, washable and made of impervious materials, (ii) an insulated dust-tight compartment that is constructed of stainless steel and is used for holding the milk hose, milk pump and milk transfer equipment, (iii) an insulated sample box that is used for holding samples of raw milk and maintains such samples at a temperature of not less than 1°C and not more than 4°C, (iv) a hose, a milk pump and milk tank gaskets, and all moving parts of the hose, milk pump and milk tank gaskets that come in contact with raw milk shall be made of a non-corrodible material that is washable, non-toxic and resistant to damage from cleansers and sanitizers and will not affect the flavour of raw milk during the transfer of raw milk to or from the milk tank, and (v) spray ball equipment for cleaning all surfaces that come in contact with raw milk, by means of the continuous circulation of a cleaning solution.
Read the Milk Quality on the Province's website ↗

Made under Natural Products Act, c. N-1.2.