Dairy Plant and Transportation of Milk, N.B. Reg. 2009-139
Section 20
Inlet and outlet valve and pipe connection
Cite as Dairy Plant and Transportation of Milk, N.B. Reg. 2009-139, s. 20 · current to November 20, 2009 · read from New Brunswick Acts and Regulations on November 16, 2026
The text
Every inlet and outlet valve and pipe connection to pasteurization holders in a dairy plant shall meet the following requirements:
(a) every valve and pipeline used in inlet and outlet connections and pasteurizers or holders shall be made of metal or another material that is suitable for the intended purpose, that is not affected by milk or cleansing agents to the extent of corroding or pitting and does not affect the flavour of milk by electrolysis or other means;
(b) every surface in contact with the milk shall be smooth and free from pits, crevices, cracks, open seams or threads;
(c) passages shall be readily disassembled for cleaning and constructed to prevent pocketing;
(d) every part shall be capable of being readily disassembled for cleaning;
(e) every inlet valve shall be of the leak-protector type and every inlet valve connection shall be constructed and located to prevent leakage or short-circuiting of unpasteurized milk into the pasteurized milk or into a pasteurizer or holder other than that being filled;
(f) every groove of an inlet valve for diverting leakage shall be of adequate size and arranged to permit free drainage;
(g) every pipeline between any inlet valve and pasteurizer or holder shall be constructed so as to minimize the distance between the two and sloped or otherwise arranged to drain freely;
(h) every outlet valve shall be of the leak-protector type and shall have the valve seat either flush with the inner wall of the pasteurizer or so closely coupled that all milk in the valve pocket is within the influence of the agitation created by the stirring equipment;
(i) every outlet valve shall prevent leakage past the valve seat into the milk outlet and grooves for diverting leakage shall be of adequate size and arranged to permit free drainage; and
(j) valves shall be provided with stops and guides to ensure proper operation.
Read the Dairy Plant and Transportation of Milk on the Province's website ↗
Made under Public Health Act, c. P-22.4.