Dairy Plant and Transportation of Milk, N.B. Reg. 2009-139
Section 18
General requirements
Cite as Dairy Plant and Transportation of Milk, N.B. Reg. 2009-139, s. 18 · current to November 20, 2009 · read from New Brunswick Acts and Regulations on November 16, 2026
The text
(1) The equipment and containers used for the handling, processing or storing of milk in a dairy plant shall be so constructed and kept in good repair as to facilitate cleaning and bactericidal treatment.
(2) Any surfaces of equipment and containers with which milk comes in contact shall be of smooth, non-corrodible metal or another material that is suitable for its intended purpose and is durable, free from accumulation of milk, solids and other foreign substances, self-draining and readily accessible for cleaning and every joint in any such equipment or container shall be made flush with the surface or otherwise constructed to avoid open seams.
(3) Any equipment used for the processing or storing of milk shall be constructed of such material and maintained so as not to adversely affect the quality or taste of the milk.
(4) Holding vats shall be adequately insulated to prevent undesirable heat loss.
(5) Milk receiving vats shall be placed and protected to prevent contamination of the milk.
(6) Tight-fitting covers shall be provided for the equipment and shall be arranged to prevent the entrance of drainage or water of condensation from the outside into the milk when the equipment is in either the open or closed position.
Read the Dairy Plant and Transportation of Milk on the Province's website ↗
Made under Public Health Act, c. P-22.4.