Utilities Commission Act, RSBC 1996, c. 473
Section 125.2
Adoption of reliability standards, rules or codes
Cite as Utilities Commission Act, RSBC 1996, c. 473, s. 125.2 · read from BC Laws on November 17, 2026
The text
(1) In this section:
“reliability standard” means a reliability standard, rule or code established by a standard-making body for the purpose of being a mandatory reliability standard for planning and operating the North American bulk electric system, and includes any substantial change to any of those standards, rules or codes;
“standard-making body” means
(a) the North American Electric Reliability Corporation,
(b) the Western Electricity Coordinating Council, and
(c) a prescribed standard-making body.
(2) For greater certainty, the commission has exclusive jurisdiction to determine whether a reliability standard is in the public interest and should be adopted in British Columbia.
(3) The authority must review each reliability standard and provide to the commission, in accordance with the regulations, a report assessing
(a) any adverse impact of the reliability standard on the reliability of electricity transmission in British Columbia if the reliability standard were adopted under subsection (6),
(b) the suitability of the reliability standard for British Columbia,
(c) the potential cost of the reliability standard if it were adopted under subsection (6),
(c.1) the application of the reliability standard to persons or persons in respect of specified equipment if the reliability standard were adopted under subsection (6), and
(d) any other matter prescribed by regulation or identified by order of the commission for the purposes of this section.
(4) The commission may make an order for the purposes of subsection (3) (d).
(5) If the commission receives a report under subsection (3), the commission must
(a) make the report available to the public in a reasonable manner, which may include by electronic means, and for a reasonable period of time, and
(b) consider any comments the commission receives in reply to the publication referred to in paragraph (a).
(6) After complying with subsection (5), the commission, subject to subsection (7), must, by order, adopt the reliability standards addressed in the report if the commission considers that the reliability standards are required to maintain or achieve consistency in British Columbia with other jurisdictions that have adopted the reliability standards.
(7) The commission is not required to adopt a reliability standard under subsection (6) if the commission determines, after a hearing, that the reliability standard is not in the public interest.
(8) Subject to subsection (8.3), a reliability standard adopted under subsection (6) applies as specified in an order made under subsection (6).
(8.1) At the request of the commission, the authority must provide to the commission, in accordance with any directions made by the commission, a report assessing the application of a reliability standard adopted under subsection (6) to a specified person, a class of persons or a person in respect of specified equipment.
(8.2) Subsection (5) applies to a report received by the commission under subsection (8.1).
(8.3) After complying with subsection (5) respecting a report received under subsection (8.1), the commission may, by order, specify that a reliability standard adopted under subsection (6) applies or does not apply to a specified person, a class of persons or a person in respect of specified equipment.
(9) A reliability standard adopted under subsection (6) applies as specified in an order made under subsection (6) or (8.3) despite an exemption issued under section 22 or 88 (3).
(10) The commission may make orders providing for the administration of adopted reliability standards.
(10.1) Without limiting subsection (10), section 43 (1) (a) and (b) (i) applies to a person to whom a reliability standard adopted under subsection (6) of this section applies, as though the person were a public utility.
(11) The commission, on its own motion or on complaint, may
(a) rescind an adoption made under subsection (6), or
(b) adopt a reliability standard previously rejected under subsection (7)
if the commission determines, after a hearing, that the rescission or adoption is in the public interest.
(12) The commission, without the approval of the minister responsible for the administration of the Hydro and Power Authority Act, may not set a standard or rule under section 26 of this Act with respect to a matter addressed by a reliability standard assessed in a report submitted to the commission under subsection (3) of this section.
Read the Utilities Commission Act on BC Laws ↗