National Instrument 43-101 Standards of Disclosure for Mineral Projects, B.C. Reg. 86/2011

Section 2.3

Restricted disclosure

Cite as National Instrument 43-101 Standards of Disclosure for Mineral Projects, B.C. Reg. 86/2011, s. 2.3 · last amended June 9, 2023 · read from BC Laws on November 17, 2026

The text

(1) An issuer must not disclose (a) the quantity, grade, or metal or mineral content of a deposit that has not been categorized as an inferred mineral resource, an indicated mineral resource, a measured mineral resource, a probable mineral reserve or a proven mineral reserve; (b) the results of an economic analysis that includes or is based on inferred mineral resources or an estimate permitted under subsection 2.3 (2) or section 2.4; (c) the gross value of metal or mineral in a deposit or a sampled interval or drill intersection; or (d) a metal or mineral equivalent grade for a multiple commodity deposit, sampled interval, or drill intersection, unless it also discloses the grade of each metal or mineral used to establish the metal or mineral equivalent grade. (2) Despite paragraph (1) (a), an issuer may disclose in writing the potential quantity and grade, expressed as ranges, of a target for further exploration if the disclosure (a) states with equal prominence that the potential quantity and grade is conceptual in nature, that there has been insufficient exploration to define a mineral resource and that it is uncertain if further exploration will result in the target being delineated as a mineral resource; and (b) states the basis on which the disclosed potential quantity and grade has been determined. (3) Despite paragraph (1) (b), an issuer may disclose the results of a preliminary economic assessment that includes or is based on inferred mineral resources if the disclosure (a) states with equal prominence that the preliminary economic assessment is preliminary in nature, that it includes inferred mineral resources that are considered too speculative geologically to have the economic considerations applied to them that would enable them to be categorized as mineral reserves, and there is no certainty that the preliminary economic assessment will be realized; (b) states the basis for the preliminary economic assessment and any qualifications and assumptions made by the qualified person; and (c) describes the impact of the preliminary economic assessment on the results of any pre-feasibility or feasibility study in respect of the subject property. (4) An issuer must not use the term preliminary feasibility study, pre-feasibility study or feasibility study when referring to a study unless the study satisfies the criteria set out in the definition of the applicable term in section 1.4.
Read the National Instrument 43-101 Standards of Disclosure for Mineral Projects on BC Laws ↗

Made under Securities Act, RSBC 1996, c. 418.