Motor Assisted Cycle (E-Bike) Regulation, B.C. Reg. 64/2024
Section 3
Motor-related criteria
Cite as Motor Assisted Cycle (E-Bike) Regulation, B.C. Reg. 64/2024, s. 3 · last amended April 5, 2024 · read from BC Laws on November 17, 2026
The text
(1) For the purposes of section 182.1 (2) (c) [motor assisted cycles] of the Act, the device must have one or more attached electric motors that have a continuous power output rating that, in total, does not exceed 500 W.
(2) For the purposes of section 182.1 (2) (d) of the Act, the following motor-related criteria must also be met:
(a) the motors must not be capable of propelling the device at a speed exceeding 32 km/h when the device is being operated on a clean, paved and level surface;
(b) the motors of the device must cease to propel the device forward as follows:
(i) if the motors are engaged by pedalling, when the operator stops pedalling;
(ii) if the motors are engaged by hand cranking, when the operator stops hand cranking;
(iii) if the motors are engaged by operating an accelerator controller, when the operator releases or disengages the accelerator controller;
(iv) regardless of how the motors are engaged, when the operator applies a brake;
(c) if the device is equipped with an accelerator controller, the device must be equipped with a mechanism, separate from the accelerator controller, that does either of the following:
(i) allows the operator, while operating the device, to turn the motors on and off from a normal seated position;
(ii) prevents the motors from turning on or engaging before the device attains a speed of 3 km/h;
(d) the device must not have a generator or alternator, or similar device, powered by a combustion engine.
Read the Motor Assisted Cycle (E-Bike) Regulation on BC Laws ↗
Made under Motor Vehicle Act, RSBC 1996, c. 318.