Hazardous Waste Regulation, B.C. Reg. 63/88

Section 50

Storage and transportation

Cite as Hazardous Waste Regulation, B.C. Reg. 63/88, s. 50 · last amended July 1, 2026 · read from BC Laws on November 17, 2026

The text

(1) For the purposes of this section, materials are compatible with one another when, under normal conditions of storage or transport, (a) hazardous waste will not be released into the environment, (b) no heat, gas, corrosive or toxic substance is given off, and (c) the effectiveness of the packaging of the hazardous waste is not reduced. (2) Any person who (a) transports hazardous waste, or (b) is required to store hazardous waste in a container, must use a container that is designed, constructed or lined with materials that are compatible with the waste. (3) A person who uses a container to store or transport hazardous waste must (a) keep the container closed at all material times during storage or transport, (b) not open, handle, store or transport the container in a manner which may cause it to leak or rupture, and (c) ensure that the outside of the container is clearly labeled with the shipping name of the hazardous waste it contains and, if the hazardous waste is a dangerous good, the class and UN number of that hazardous waste, both as set out in the federal dangerous goods regulations. (4) A person must not store or transport in the same container (a) two or more hazardous wastes which are not compatible, or (b) a hazardous waste which is not compatible with any substance placed in the container. (5) A person must not place hazardous waste in an unwashed container that previously held a material which is incompatible with that hazardous waste or allow incompatible wastes to come into contact with each other. (6) A person must not store or transport hazardous waste in a small inside container within a labpack unless (a) the container is enclosed within an open head metal labpack which (i) has a tight fitting gasketted lid, and (ii) is lined with a plastic bag not less than 4 mil thick, (b) the container is not leaking and is securely sealed, (c) any container of liquid hazardous waste is put inside a clear plastic bag not less than 4 mil thick which is sealed before being placed inside the labpack, (d) the waste within the container is identifiable either by (i) the original label on the container, or (ii) a new label applied to the container or plastic bag stating the correct shipping name, (e) sufficient inert packing material is used to fill all spaces between the inside containers so as to prevent accidental breakage and leakage, and (f) a list of the contents and size of each container is (i) retained for inspection by an officer while the hazardous waste is being stored, (ii) attached to the manifest while the hazardous waste is being transported, and (iii) attached, by the consignee, to the copies of the manifest which are sent to the appropriate authorities under the federal dangerous goods regulations. (7) A person must not use a container which contains residues of hazardous waste to hold, store or transport food, animal feed or a product which may directly become part of the human food chain. (8) A person must not store or transport hazardous waste unless it is placed in a container or otherwise secured so that under normal conditions of storage or transport the hazardous waste does not leak or escape into the environment.
Read the Hazardous Waste Regulation on BC Laws ↗

Made under Environmental Management Act, SBC 2003, c. 53.