Hazardous Waste Regulation, B.C. Reg. 63/88
Section 40
Management of waste asbestos
Cite as Hazardous Waste Regulation, B.C. Reg. 63/88, s. 40 · last amended July 1, 2026 · read from BC Laws on November 17, 2026
The text
(1) For the purposes of the definition of "waste asbestos" in section 1 (1) of this regulation, if the concentration of asbestos in the waste is not determined by weight at the time of manufacture, it must be determined using one of the following:
(a) Method 600-R-93-116, as amended from time to time, published by the United States Environmental Protection Agency;
(b) NIOSH Method 9002, as amended from time to time, from the NIOSH Manual of Analytical Methods, 4th Edition, published by the National Institute for Occupational Safety and Health, United States.
(2) A person must not deposit waste asbestos in a landfill other than a secure landfill unless
(a) a permit or an approval has been issued under the Act to operate the landfill, or the landfill is operated under a waste management plan,
(b) the waste asbestos is confined during handling, storage and transportation by
(i) dry airtight containment techniques such as
(A) packing in 6 mil plastic bags placed within a non-reuseable drum and then sealed, or
(B) packing in a 6 mil plastic bag placed within a second 6 mil plastic bag and then sealed, or
(ii) wet containment techniques such as saturation with water and containment in non-leaking sealed drums or equivalent, or
(iii) approved containment techniques,
(c) the waste asbestos is disposed of at the landfill by being immediately buried with a minimum of 0.5 m of cover material,
(d) approval of the landfill owner is received before disposal takes place, and
(e) the deposit is authorized by a director and carried out in accordance with the director's requirements.
Read the Hazardous Waste Regulation on BC Laws ↗
Made under Environmental Management Act, SBC 2003, c. 53.