Weld Repair of Aluminum Alloy Wheels Regulation, B.C. Reg. 5/97
Section 6
Qualifications of the weld repair supervisor
Cite as Weld Repair of Aluminum Alloy Wheels Regulation, B.C. Reg. 5/97, s. 6 · last amended February 28, 2022 · read from BC Laws on November 17, 2026
The text
(1) A facility must have a weld repair supervisor who has at least 5 years of experience in aluminum weld repair.
(2) The weld repair supervisor must be the owner of the facility or a person designated by the owner as weld repair supervisor.
(3) The weld repair supervisor is responsible for all weld repairs including
(a) making the repair or discard decision,
(b) assigning the severity rating to each repaired aluminum alloy wheel, and
(c) the weld quality of the repaired aluminum alloy wheels.
(4) The weld repair supervisor must ensure that
(a) the quality of the weld repair meets the requirements of this regulation, and
(b) a log book is maintained in which each weld repair is recorded indicating
(i) the name of the owner of the wheel,
(ii) the date of repair,
(iii) the name and certification number of the welder who performed the repair, and
(iv) the severity rating code required by section 13 (2) (c).
(5) If it is decided under section 9 to discard a damaged wheel, the weld repair supervisor must ensure that
(a) the wheel is stamped as required by section 9 (3), and
(b) a log book is maintained in which each discard decision is recorded indicating
(i) the name of the owner of the wheel,
(ii) the date of the discard decision, and
(iii) the name of the weld repair supervisor who made the discard decision.
(6) The log book entries required by subsections (4) (b) and (5) (b) may be made in the same log book.
Read the Weld Repair of Aluminum Alloy Wheels Regulation on BC Laws ↗
Made under Motor Vehicle Act, RSBC 1996, c. 318.