Petroleum and Natural Gas Grid Regulation, B.C. Reg. 536/2004
Section 3
Petroleum and natural gas grid
Cite as Petroleum and Natural Gas Grid Regulation, B.C. Reg. 536/2004, s. 3 · last amended February 27, 2020 · read from BC Laws on November 17, 2026
The text
(1) The petroleum and natural gas grid is defined by a set of universal transverse mercator map projection coordinates for the northeast corner of each quarter unit illustrated in Schedule 3.
(2) The petroleum and natural gas grid must be issued and maintained by the Surveyor General, and is available for inspection at the office of the Surveyor General.
(3) The grid coordinates are the same as defined in the Mineral Tenure Online Grid Regulation.
(4) The petroleum and natural gas grid quarter unit coordinates are based on the North American Datum of 1983 Canadian Spatial Reference System (NAD83 CSRS).
(5) The petroleum and natural gas grid takes into account the historical petroleum and natural gas grid using the North American Datum of 1927 system of latitudes and longitudes.
(6) Despite subsection (1), the defining of the petroleum and natural gas grid using universal transverse mercator map projection coordinates does not affect existing rights.
Read the Petroleum and Natural Gas Grid Regulation on BC Laws ↗
Made under Petroleum and Natural Gas Act, RSBC 1996, c. 361.