Pulp Mill and Pulp and Paper Mill Liquid Effluent Control Regulation, B.C. Reg. 470/90
Section 1
Interpretation
Cite as Pulp Mill and Pulp and Paper Mill Liquid Effluent Control Regulation, B.C. Reg. 470/90, s. 1 · last amended April 1, 2018 · read from BC Laws on November 17, 2026
The text
(1) In this regulation:
“Act” means the Environmental Management Act;
“ADt” means an air dry tonne of pulp product where the weight of the pulp product is corrected to reflect the weight that the pulp product would be if the pulp were composed of 10% water and 90% fibre;
“AOX” means halogenated organic compounds that are adsorbable by activated carbon;
“CBPROD” means, subject to subsection (2), the 90th percentile of the daily production rate of bleached pulp produced from an on-site bleach plant with the use of chlorine or chlorine compounds, or both chlorine and chlorine compounds, expressed as ADt, determined by the use of statistical methods, and using a period of time approved by a director for determination of the 90th percentile of the rate of chlorine or chlorine compound bleached pulp production;
“compliance sampling method” means the technique used to collect samples which are subsequently analyzed to determine if the effluent satisfies the quality standards established under sections 2, 3 and 6;
“EFF” means, subject to subsection (2), the 90th percentile of the rate of effluent, expressed as m3/day, including any sanitary effluent combined with process effluent, discharged from a pulp or paper or pulp and paper mill, determined by the use of statistical methods, and using a period of time approved by a director for determination of the 90th percentile of the rate of discharge of effluent;
“permittee” means a person who holds a permit issued under section 14 of the Act;
“phase I” means a compliance sampling period commencing on the date this regulation comes into force and expiring on the date that phase II commences;
“phase II” means a compliance sampling period commencing on a date specified in writing by the director;
“PROD” means, subject to subsection (2), the 90th percentile of the daily production rate of a pulp or paper or pulp and paper mill, expressed as ADt, determined by the use of statistical methods, and using a period of time approved by a director for determination of the 90th percentile of the rate of production;
“96 h LC50 toxicity” means the calculated concentration of effluent that is lethal to 50% of the test fish (rainbow trout (Oncorhynchus mykiss)) during a 96 hour exposure.
(2) If there is an insufficient number of days of production to perform a valid 90th percentile calculation of CBPROD, EFF or PROD, the director may use the mill's chlorine or chlorine compound bleached pulp production design figure, effluent flow design figure or production design figure respectively as values for CBPROD, EFF or PROD until such time as these parameters may be calculated in accordance with subsection (1).
Read the Pulp Mill and Pulp and Paper Mill Liquid Effluent Control Regulation on BC Laws ↗
Made under Environmental Management Act, SBC 2003, c. 53.