Milk Industry Standards Regulation, B.C. Reg. 464/81

Section 38

Farm holding tank calibration

Cite as Milk Industry Standards Regulation, B.C. Reg. 464/81, s. 38 · last amended March 6, 2024 · read from BC Laws on November 17, 2026

The text

(1) Measurement calibration of a farm holding tank shall be carried out (a) after the installation of the tank in the milk house is certified in writing by an inspector, (b) by a person qualified as a calibrator, (c) in accordance with the Put-in-Method procedures set out in the Dairy Branch Field Manual, and (d) to ensure that measurements of the contents of that tank conform to subsection (2). (2) In addition to the requirements of subsection (1) and section 39, every farm holding tank used for measuring and sampling raw milk as a basis for sale to a dairy plant shall be checked for accuracy of calibration (a) in the fifth year after the year in which the original calibration is made under subsection (1), and (b) at intervals of 5 years from the year of the first check. (3) Checking for accuracy of calibration shall be performed by the person qualified as a calibrator. (4) The owner or lessee of the farm holding tank that is checked for accuracy of calibration shall be liable for the payment of the costs of checking the accuracy of calibration of that tank. (5) Where a check for accuracy of calibration under this section indicates that a recalibration of a farm holding tank is necessary, the owner or lessee of the tank shall correct the fault and give proof of recalibration within a time specified by an inspector.
Read the Milk Industry Standards Regulation on BC Laws ↗

Made under Milk Industry Act, RSBC 1996, c. 289.