Recycling Regulation, B.C. Reg. 449/2004
Schedule 2
Schedule 2
Cite as Recycling Regulation, B.C. Reg. 449/2004, Schedule 2 · last amended November 21, 2025 · read from BC Laws on November 17, 2026
The text
Schedule 2
[am. B.C. Regs. 296/2009, s. 6; 206/2017, s. 19; 162/2020, App. 1, ss. 4 to 7; 170/2025, App. 3, s. 8.]
Residual Product Categories 1 Repealed. [B.C. Reg. 170/2025, App. 3, s. 8 (a).] 2 The solvent and flammable liquids product category consists of
(a) products with a flash point as tested by the ASTM D1310 Tag Open Cup Test Method of less than 61C with the exception of
(i) products containing less than 50% water-miscible flammable liquid, as defined by the National Fire Code of Canada, 1990, as published by the National Research Council of Canada, by volume with the remainder of the product not being flammable,
(ii) liquids that have no fire point as tested by the ASTM D1310 Tag Open Cup Test Method,
(iii) wine and distilled spirit beverages,
(iv) cosmetic and beauty products,
(v) drugs, medicines and other health products,
(vi) unpackaged products or products not ordinarily sold to, used or purchased by a consumer without repackaging,
(vii) pre-packaged products produced for use by commercial or industrial enterprises without resale to other consumers as pre-packaged goods,
(viii) products in the paint product category,
(ix) coatings formulated for industrial or automotive use, and
(x) pre-packaged kerosene in containers larger than 9 litres,
(b) paint strippers containing methylene chloride, and
(c) containers for the products described in paragraphs (a) and (b). 3
(1) Subject to subsection (2), the pesticide product category consists of control products registered under the Pest Control Products Act (Canada), and includes containers for those products, that
(a) are required to show on the label the domestic product class designation, and
(b) display on the label the symbol shown in Schedule III of the Pest Control Products Regulation (Canada) for the signal word “Poison”.
(2) The pesticide product category does not include the following:
(a) insect repellents;
(b) sanitizers and disinfectants;
(c) pet products;
(d) unpackaged products or products not ordinarily sold to, used or purchased by a consumer without repackaging. 4 The gasoline product category consists of gasoline sold for use in spark ignition engines and returned in an approved Underwriters Laboratories of Canada container, and includes containers for this gasoline. 5
(1) In this section, “drug” has the same meaning as in the Food and Drugs Act (Canada), except without reference to animals or paragraph (c) of that definition.
(2) The pharmaceutical product category consists of
(a) all unused or expired drugs except
(i) unused or expired drugs from a hospital, as defined in section 1 of the Hospital Act, or the office of a medical practitioner,
(ii) contact lens disinfectants,
(iii) antidandruff shampoo or products,
(iv) antiperspirants,
(v) antiseptic or medicated skin care products,
(vi) sunburn protectants,
(vii) mouthwashes, and
(viii) fluoridated toothpastes, and
(b) containers for the drugs to which paragraph (a) applies. 6 The lubricating oil product category includes all
(a) petroleum-derived or synthetic
(i) crankcase, engine and gear oils, and
(ii) hydraulic, transmission and heat transfer fluids,
(b) fluids used for lubricating purposes in machinery or equipment, and
(c) containers with a capacity of 30 litres or less for the products described in paragraphs (a) and (b). 7 Repealed. [B.C. Reg. 170/2025, App. 3, s. 8 (a).] 8 The oil filter product category consists of
(a) spin-on-style or element-style fluid filters that are used in hydraulic, transmission or internal combustion engine applications, and
(b) oil, diesel fuel, storage tank fuel, coolant and household furnace oil filters,
but does not include gasoline, air or household furnace air filters. 9 The paint product category consists of
(a) latex, oil and solvent-based architectural coatings, including paints and stains for commercial and household use, whether tinted or untinted, and including containers for any of these, and
(b) paints and stains, whether coloured or clear, sold in aerosol canisters, including the aerosol canisters for any of these but not including unpressurized coatings formulated for industrial, automotive or marine anti-fouling applications. 10 The lead-acid battery product category consists of lead-acid batteries weighing more than 2 kg. 11
(1) The automotive product category consists of
(a) automotive antifreeze,
(b) automotive fluids, gels, greases, waxes, creams and aerosols designed for use in the maintenance or repair of a motor vehicle, including the following:
(i) diesel exhaust fluid;
(ii) windshield washer fluid;
(iii) brake fluid;
(iv) lubricants;
(v) stabilizers;
(vi) sealants;
(vii) sealers;
(viii) engine conditioners;
(ix) boosters;
(x) solvents;
(xi) degreasers;
(xii) fuel system cleaners, and
(c) containers, with a capacity of no more than 210 litres, for any of the products described in paragraphs (a) and (b).
(2) The automotive product category does not include products designed for use in the cleaning or aesthetic maintenance of the interior surfaces, upholstery or exterior surfaces of a motor vehicle. 11.1
(1) This section applies in relation to the following:
(a) products described in section 11 (1) (b);
(b) containers, with a capacity of no more than 210 litres, for any of the products described in section 11 (1) (b).
(2) Despite section 2 (1), a person who, on November 21, 2025, is a producer of a product referred to in subsection (1)
(a) is not required to submit an extended producer responsibility plan in accordance with section 4 [submission of extended producer responsibility plan] of this regulation until June 30, 2026, if the person continues to be a producer on that date, and
(b) is not required to have an approved plan under Part 2 [Extended Producer Responsibility Plans] of this regulation until February 1, 2027, if the person continues to be a producer on that date. 12-13 Repealed. [B.C. Reg. 206/2017, s. 19 (b).] 14
(1) The canister product category consists of
(a) the following types of canisters:
(i) pressurized non-refillable canisters, including the following:
(A) aerosol canisters;
(B) bear spray canisters and other canisters containing animal deterrent agents;
(C) fuel canisters;
(D) helium canisters;
(E) canisters containing sealants or adhesives;
(F) canisters containing cleaning agents;
(G) canisters designed to be punctured during use;
(ii) canisters containing carbon dioxide designed primarily for use in residential premises for beverage carbonation;
(iii) low-pressure spray foam canisters for construction use;
(iv) handheld fire extinguishers;
(v) portable propane cylinders with a water capacity of no more than 109 litres, other than portable propane cylinders designed primarily for use with propane-powered forklifts, and
(b) the contents of the canisters described in paragraph (a).
(2) The canister product category does not include the following canisters or their contents:
(a) canisters containing the products, substances or organisms included in the following classes listed in the Schedule to the Transportation of Dangerous Goods Act, 1992 (Canada):
(i) Class 1 — Explosives;
(ii) Class 6 — Poisonous (toxic) and infectious substances;
(iii) Class 7 — Nuclear substances that are radioactive;
(b) canisters designed for police or military use;
(c) canisters designed to be used exclusively in an institutional, industrial or laboratory setting. 15 Despite section 2 (1), a person who, on November 21, 2025, is a producer of a product within the canister product category
(a) is not required to submit an extended producer responsibility plan in accordance with section 4 [submission of extended producer responsibility plan] of this regulation until June 30, 2026, if the person continues to be a producer on that date, and
(b) is not required to have an approved plan under Part 2 [Extended Producer Responsibility Plans] of this regulation until April 1, 2027, if the person continues to be a producer on that date. 16
(1) The medical sharp product category consists of the following:
(a) needles, safety engineered needles, lancets and other similar instruments designed to puncture, for medical purposes, the skin of a person, pet, service dog or guide dog;
(b) anything affixed or designed to be affixed to an instrument described in paragraph (a), including a syringe.
(2) The medical sharp product category does not include medical sharps administered to a person, pet, service dog or guide dog if the medical sharps are administered at premises other than residential premises
(a) by a person providing care to that person, pet, service dog or guide dog, or
(b) by a person for remuneration. 17 A collection facility is not required to accept a product in the medical sharp product category if the product is not delivered to the facility in a medical sharp container. 18 Despite section 2 (1), a person who, on November 21, 2025, is a producer of a product within the medical sharp product category
(a) is not required to submit an extended producer responsibility plan in accordance with section 4 [submission of extended producer responsibility plan] of this regulation until October 1, 2026, if the person continues to be a producer on that date, and
(b) is not required to have an approved plan under Part 2 [Extended Producer Responsibility Plans] of this regulation until June 30, 2027, if the person continues to be a producer on that date.
Read the Recycling Regulation on BC Laws ↗
Made under Environmental Management Act, SBC 2003, c. 53.