Scaling Regulation, B.C. Reg. 446/94

Schedule 2

Schedule of Interior Timber Grades

Cite as Scaling Regulation, B.C. Reg. 446/94, Schedule 2 · last amended March 30, 2022 · read from BC Laws on November 17, 2026

The text

Schedule of Interior Timber Grades [en. B.C. Reg. 15/2006, s. 3; am. B.C. Regs. 80/2006; 385/2008.] All Species 1 Firmwood Reject, Grade Code Z (a) A log where (i) heart rot or hole runs the entire length of the log and the residual collar of the firmwood constitutes less than 50% of the gross scale of the log, (ii) rot is in the log and the scaler estimates the net length of the log to be less than 1.2 m, or (iii) sap rot or charred wood exists and the residual firmwood is less than 10 cm in diameter at the butt end of the log. (b) That portion of a log that is less than 10 cm in diameter or that portion of a slab that is less than 10 cm in thickness. 2 Undersized Log, Grade Code 6 A log higher in grade than firmwood reject and cut from a tree which was below the minimum diameter, including the bark, at stump height. 3 Premium Sawlog, Grade Code 1 A log 2.5 m or more in length and 10 cm or more in radius, or a slab 2.5 m or more in length and 20 cm or more in width and 20 cm or more in thickness measured at a right angle to the growth rings, where: (a) for a hemlock, cedar or balsam log or slab, at least 90 percent of the gross scale can be manufactured into lumber, (b) Repealed. [B.C. Reg. 385/2008, s. (b).] (c) for all other species, at least 75 percent of the gross scale can be manufactured into lumber, and (d) for all species, at least 75 percent of the lumber will be merchantable. 4 Sawlog, Grade Code 2 A log 2.5 m or more in length and 5 cm or more in radius, or a slab 2.5 m or more in length and 15 cm or more in width and 15 cm or more in thickness measured at a right angle to the growth rings, where: (a) for a hemlock or cedar log or slab, at least 75 percent of the gross scale can be manufactured into lumber, (b) Repealed. [B.C. Reg. 385/2008, s. (b).] (c) for a balsam log, at least 67 percent of the gross scale can be manufactured into lumber, (d) for all other species, at least 50 percent of the gross scale can be manufactured into lumber, and (e) for all species, at least 50 percent of the lumber will be merchantable. 5 Lumber Reject, Grade Code 4 A log or slab higher in grade than firmwood reject and lower in grade than sawlog.
Read the Scaling Regulation on BC Laws ↗

Made under Forest Act, RSBC 1996, c. 157.