Scaling Regulation, B.C. Reg. 446/94
Section 9
Measurements in the schedules
Cite as Scaling Regulation, B.C. Reg. 446/94, s. 9 · last amended March 30, 2022 · read from BC Laws on November 17, 2026
The text
(1) If a log or slab is measured for the purpose of determining in which grade it belongs in the schedules,
(a) subject to subsection (2), length measurements used must be the actual unrounded measurement in metres, and
(b) radius, width and thickness measurements must be in centimetres and must be rounded to the nearest whole centimetre except that a half centimetre must be rounded to the nearest even whole centimetre, and if the measurement is 15 cm or less it must be the actual unrounded measurement.
(2) If timber is bucked into logs less than 5.2 metres in length on the Coast or 2.5 metres in length in the Interior
(a) in order to facilitate the removal or transportation of the timber,
(b) for the purpose of scaling, or
(c) for the purpose of manufacturing a forest product
each bucked log is, for the purpose of classifying timber, deemed to be 5.2 metres in length on the Coast and 2.5 metres in length in the Interior.
(3) The radius for the purposes of classifying the grade of timber under section 7 is, if timber is greater than
(a) 12.8 metres in length on the Coast, the radius measured 12.8 metres from the large end of the log, or
(b) 8 metres in length in the Interior, the radius measured at the mid-point of the log.
Read the Scaling Regulation on BC Laws ↗
Made under Forest Act, RSBC 1996, c. 157.