Scaling Regulation, B.C. Reg. 446/94
Section 6
Scaling procedures
Cite as Scaling Regulation, B.C. Reg. 446/94, s. 6 · last amended March 30, 2022 · read from BC Laws on November 17, 2026
The text
A person who scales timber under section 5 (1) (a) or a sample of timber under section 5 (1) (b) must
(a) measure, with a scale stick,
(i) the diameter of the area inside the bark of each end, and
(ii) where required by the minister, any other diameter,
(b) record the radius of each end to the nearest centimetre,
(c) if a piece of timber has an irregular cross section,
(i) determine the approximate area of the cross section after measuring 2 or more axes of the cross section, and
(ii) determine and record the radius of a circle with the area determined under paragraph (i),
(d) if there is visible flare in a butt log, project the line of normal taper of the log to the large end and measure only the part of the diameter that is located inside the line of normal taper,
(e) measure and record the length of a piece of timber between 2 planes that are perpendicular to the longitudinal axis of the piece and situated at the geometric centre of each end face,
(f) if the minister directs that a diameter be measured at a place other than the end, measure the length between every adjacent diameter, and measure the diameters and record the log as 2 or more pieces,
(g) record the length measured under paragraphs (e) and (f)
(i) to the nearest tenth of a metre, or
(ii) if the measurement is 0.05 metres from the nearest tenth of a metre, to the nearest even tenth of a metre,
(h) if there are one or more defects in the form of rotted, holed or charred wood,
(i) reduce the measured radii or length of a piece of timber accordingly and record measurements that compute the firmwood volume of the piece of timber, or
(ii) record the type and required dimensions of the defect or defects, and reduce the gross scale of the piece of timber by the computed volume of the defect or defects,
(i) classify and record each piece of timber by timber mark, species and grade and, in the case of parcels containing logs with no readily discernible timber mark, record the mark as "NMV" to indicate that no mark is visible,
(j) mark each piece, unit or parcel of timber at the time of making the scale with an identifiable mark to indicate that it has been scaled, and
(k) classify the grade of timber in accordance with sections 7 to 9.
Read the Scaling Regulation on BC Laws ↗
Made under Forest Act, RSBC 1996, c. 157.