Scaling Regulation, B.C. Reg. 446/94
Section 5
Type of scale
Cite as Scaling Regulation, B.C. Reg. 446/94, s. 5 · last amended March 30, 2022 · read from BC Laws on November 17, 2026
The text
(1) Timber that is required by the Act to be scaled must be scaled by one of the following methods:
(a) by determining the volume and classifying the quality of each piece of timber,
(b) by determining the volume and classifying the quality of samples of the timber, or
(c) by determining the volume and classifying the quality of timber using a method approved by the minister
(i) for the purposes of section 3 (1) of this regulation,
(ii) to account for timber lost during water transportation, as reported under section 2 (3) of the Timber Marking and Transportation Regulation, or
(iii) for the circumstances specified by the minister.
(1.1) Timber scaled under subsection (1) (b) must be scaled in accordance with a sampling plan approved by the minister as follows:
(a) all the timber is segregated by timber mark and weighed;
(b) the approved sampling plan requires the measuring of a sufficient number of samples to provide an estimate of the total volume of timber included under the sampling plan that has a statistical reliability of plus or minus 1%, 19 times out of 20;
(c) the sum of the volume of a number of pieces of timber of the same species and grade, as measured in the sample, is rounded to the nearest 0.01 m3;
(d) the quotient resulting from dividing the sample volume, as determined under paragraph (c), by the sample weight is calculated to 5 decimal places.
(2) An approval under subsection (1) (b) or (c) may be withdrawn at any time by the minister in order to ensure accurate scaling.
(3) Repealed. [B.C. Reg. 104/2009, s. 2 (b).]
(4) Repealed. [B.C. Reg. 241/2003, s. (c).]
(5) Repealed. [B.C. Reg. 89/2011, Sch. s. 6.]
Read the Scaling Regulation on BC Laws ↗
Made under Forest Act, RSBC 1996, c. 157.