Dam Safety Regulation, B.C. Reg. 40/2016

Section 19

Instrumentation

Cite as Dam Safety Regulation, B.C. Reg. 40/2016, s. 19 · last amended February 10, 2023 · read from BC Laws on November 17, 2026

The text

(1) An owner of a dam must do all of the following: (a) install the instrumentation necessary to adequately monitor the dam and the area surrounding or adjacent to the dam; (b) maintain or replace the instrumentation referred to in paragraph (a) to ensure continuity of readings; (c) collect readings from the instrumentation referred to in paragraph (a) and analyze and interpret the readings no less frequently than is specified in item 5 of the table in Schedule 2 for the classification of the dam. (2) An owner of a dam who intends to install, modify, replace or remove instrumentation relating to the dam must submit to a dam safety officer, for acceptance by the dam safety officer, (a) a record describing the proposed installation, modification, replacement or removal at least 60 days before the date on which the owner expects the installation, modification, replacement or removal to occur, or (b) an annual plan outlining all installations, modifications, replacements and removals of instrumentation proposed for the following year. (3) An owner of a dam must not install, modify, replace or remove instrumentation relating to the dam until the record or plan referred to in subsection (2) (a) or (b), as applicable, has been accepted by a dam safety officer.
Read the Dam Safety Regulation on BC Laws ↗

Made under Water Sustainability Act, SBC 2014, c. 15.