Groundwater Protection Regulation, B.C. Reg. 39/2016
Section 65
Maintenance of casing and stick-up
Cite as Groundwater Protection Regulation, B.C. Reg. 39/2016, s. 65 · last amended December 1, 2022 · read from BC Laws on November 17, 2026
The text
(1) The owner of a well to which section 33 [casing stick-up] applies must ensure that the production casing
(a) is maintained in a manner that ensures that the production casing remains continuous and the casing stick-up extends a minimum of 0.3 m above
(i) the surface of the ground adjacent to the well, or
(ii) the floor of the well sump, pump house or well pit, and
(b) if damaged, is repaired or replaced with production casing that meets the requirements of
(i) section 20 [casings and liners — general requirements],
(ii) section 21 [thermoplastic casings and liners for water supply wells], if applicable, and
(iii) section 34 [protection of thermoplastic casings], if applicable.
(2) The owner of a well must ensure that thermoplastic casing used in the well remains protected from damage and material breakdown.
Read the Groundwater Protection Regulation on BC Laws ↗
Made under Water Sustainability Act, SBC 2014, c. 15.