Groundwater Protection Regulation, B.C. Reg. 39/2016
Section 55
Well identification plate attachment
Cite as Groundwater Protection Regulation, B.C. Reg. 39/2016, s. 55 · last amended December 1, 2022 · read from BC Laws on November 17, 2026
The text
(1) A well identification plate required under this Part must be securely attached to the casing, well cap or well cover of the well so that the well identification number is plainly visible.
(2) If it is not possible to securely attach the well identification plate to the casing, well cap or well cover, the well identification plate may be securely attached to any of the following so that the well identification number is plainly visible:
(a) the discharge pipe;
(b) the pump motor housing;
(c) the stand at the top of the well;
(d) the pump house;
(e) a nearby post.
(3) If 2 or more wells are contained in a single protective casing, each of those wells must have a well identification plate.
Read the Groundwater Protection Regulation on BC Laws ↗
Made under Water Sustainability Act, SBC 2014, c. 15.