Groundwater Protection Regulation, B.C. Reg. 39/2016
Section 28
Development and screens — water supply wells
Cite as Groundwater Protection Regulation, B.C. Reg. 39/2016, s. 28 · last amended December 1, 2022 · read from BC Laws on November 17, 2026
The text
(1) In this Division, “alter” does not include the installation of a surface seal.
(2) The person responsible for drilling, altering or rehabilitating a water supply well must develop the water supply well in a manner that prevents the following during the development or operation of the water supply well:
(a) significant collapse of the surface of the ground around the water supply well;
(b) damage to the surface seal of the water supply well.
(3) The person responsible for drilling a water supply well into an unconsolidated aquifer, or altering a water supply well so that the well penetrates an unconsolidated aquifer, must equip the well with a screen assembly
(a) that is securely attached to the production casing, and
(b) the screen component of which
(i) is composed of durable material having strength suited to the particular soil and water conditions encountered during drilling or alteration, and
(ii) has slot openings that are appropriately sized so that the depth of the well does not change as a result of sand or other unconsolidated material being drawn in during operation of the well or building up in the well.
(4) A screen assembly is not required under subsection (3) if
(a) the water supply well is an excavated well, or
(b) the gravel or other unconsolidated material naturally exposed at the bottom of the production casing is coarse enough to allow the water supply well to be developed so that
(i) the bottom of the production casing is stable, and
(ii) the depth of the well does not change as a result of sand or other unconsolidated material being drawn in during operation of the well or building up in the production casing.
Read the Groundwater Protection Regulation on BC Laws ↗
Made under Water Sustainability Act, SBC 2014, c. 15.