Contaminated Sites Regulation, B.C. Reg. 375/96
Section 12
Specification of applicable land, water, sediment and vapour uses and site-specific factors
Cite as Contaminated Sites Regulation, B.C. Reg. 375/96, s. 12 · last amended July 1, 2026 · read from BC Laws on November 17, 2026
The text
(1) For the purpose of using the standards in this regulation,
(a) if a protocol provides for more than one land use at a particular site, the land uses that apply, at any given time, to the site or a part of the site are the land uses that apply in accordance with the protocol, and
(b) otherwise, the land use that applies, at any given time, to a particular site or a part of a site is the primary land use at the surface of the site.
(2) For the purpose of using the standards in this regulation, the surface water uses or groundwater uses which apply, at any given time, to a particular site or part of a site are based on
(a) the uses of the surface water or groundwater at the site or on neighbouring sites, and
(b) the potential for the groundwater or surface water to cause pollution.
(2.1) For the purpose of using the standards in this regulation, the sediment use that applies, at any given time, to a particular site or a part of a site is based on
(a) the use of sediment at the site or at neighbouring sites, and
(b) the potential for the sediment to cause pollution.
(2.2) For the purpose of using the standards in this regulation, the vapour use that applies, at any given time, to a particular site or a part of a site is based on
(a) the uses of the land at the surface of the site, and
(b) the potential of the vapour to cause pollution.
(2.3) A director may specify the applicable land use under subsection (2.2) from the following:
(a) a land use specified in subsection (3) (a) to (f);
(b) if a parkade is located at the site, parkade use.
(3) Subject to subsection (6), a director may specify the applicable land use or uses, as the case may be, under subsection (1) from the following:
(a) wildlands land use or, if applicable, one of the following:
(i) natural wildlands land use;
(ii) reverted wildlands land use;
(b) agricultural land use;
(c) urban park land use;
(d) residential land use or, if applicable, one of the following:
(i) low density residential land use;
(ii) high density residential land use;
(e) commercial land use;
(f) industrial land use.
(4) A director may specify the applicable water uses under subsection (2) from the following:
(a) aquatic life water use;
(b) irrigation water use;
(c) livestock water use;
(d) drinking water use.
(4.1) A director may specify the applicable sediment use under subsection (2.1) from the following:
(a) typical sediment use;
(b) sensitive sediment use.
(5) In specifying the primary land use, water use or sediment use under subsections (3), (4) and (4.1), a director must take into account current and reasonable potential future land, water and sediment uses based on the following factors:
(a) current and proposed zoning for the site;
(b) land use and planning policies of the government or the municipality or municipalities in which the site and neighbouring sites are situated;
(c) current site activities;
(d) proposed site activities;
(e) current and proposed uses for surface water and groundwater on the site;
(f) current and proposed land use, and surface water and groundwater uses of neighbouring sites;
(g) current nearby uses of other surface water and groundwater;
(h) the potential for surface water and groundwater to cause pollution;
(h.1) current and proposed uses for sediment at neighbouring sites;
(h.2) potential for surface water, groundwater and sediment to cause pollution on neighbouring sites;
(i) other factors that a director considers appropriate in the circumstances.
(6) If the current or anticipated future use of a site is not encompassed within any of the land uses specified in subsection (3), the land use that applies to the site must be chosen from the land uses in subsection (3) based on the historical activities at the site.
(7) For the purpose of using matrix numerical soil standards and site-specific numerical standards, a director may specify the applicable site-specific factors for a site after consideration of the land and water use factors in subsection (5).
(8) For the purpose of using matrix numerical soil standards and site-specific numerical soil standards, the site-specific factors for
(a) human intake of contaminated soil, and
(b) toxicity to soil invertebrates and plants
are mandatory and must be applied at every site.
Read the Contaminated Sites Regulation on BC Laws ↗
Made under Environmental Management Act, SBC 2003, c. 53.