Commercial Transport Regulations, B.C. Reg. 30/78

Section 7.31

Maximum axle load and spacing

Cite as Commercial Transport Regulations, B.C. Reg. 30/78, s. 7.31 · last amended August 5, 2025 · read from BC Laws on November 17, 2026

The text

(1) A person must not, without an overload permit, drive or operate on a highway (a) a loaded logging truck combination, if an axle carries a gross weight in excess of 9 100 kg and the logging truck combination has a group of axles within a spacing of 8 m or less and the group of axles carries the gross weight indicated in column 2 of the table in section 7.17 opposite the distance between the centres of the first and last axle of the group as indicated in column 1 of that table, (b) a 3-vehicle combination of vehicles if (i) the combination consists, in part, of a truck tractor, and (ii) a single steering axle on the truck tractor carries a gross weight in excess of 6 000 kg, unless the combination consists, in part, of a truck or truck tractor that is equipped with a log self-loader, in which case the maximum steering axle load is 9 100 kg, and (c) a 3-vehicle combination of vehicles with a gross vehicle weight in excess of 57 000 kg unless (i) the power unit is a truck tractor, and (ii) the kingpin of the first semi-trailer is positioned at, or forward of, a point midway between the centre of the 2 rearmost axles of the truck tractor. (2) A person must not, without a permit, drive or operate a logging truck combination which includes a tridem pole trailer or a semi-trailer equipped with a tridem axle if (a) a tandem axle exceeds 17 000 kg in weight, or (b) a tridem axle exceeds 25 000 kg in weight. (3) A person must not, without a permit, drive or operate on a highway a tridem-drive tractor logging truck unless the vehicle weights and dimensions comply with the description for that vehicle configuration in the Appendices.
Read the Commercial Transport Regulations on BC Laws ↗

Made under Commercial Transport Act, RSBC 1996, c. 58.