Commercial Transport Regulations, B.C. Reg. 30/78
Section 7.28
Logging truck kingpin setback and front and rear projections
Cite as Commercial Transport Regulations, B.C. Reg. 30/78, s. 7.28 · last amended August 5, 2025 · read from BC Laws on November 17, 2026
The text
(1) Except as provided in subsection (2), a person must not, without a permit, drive or operate a combination of vehicles in which the distance from the front-most vehicle articulation point to the extreme rear of the vehicle combination exceeds 18.0 m, but not including as part of that distance anything described in section 7.08 (6) (b) (i), (iii) or (iv).
(2) A person must not, without a permit, drive or operate on a highway a pole trailer in combination with one other vehicle if the combination of vehicles is carrying a load that projects forward of the vertical axis of rotation of the forward bunk by a radius of more than 3.0 m.
(3) A person must not, without a permit, drive or operate on a highway a vehicle combination consisting of a logging truck tractor and pole trailer if the combination has a rear projection from the centre of the last rotatable log bunk to the rear-most part of the vehicle combination or load that exceeds 5.0 m.
Read the Commercial Transport Regulations on BC Laws ↗
Made under Commercial Transport Act, RSBC 1996, c. 58.