Commercial Transport Regulations, B.C. Reg. 30/78
Section 7.16
Maximum gross weight for axles
Cite as Commercial Transport Regulations, B.C. Reg. 30/78, s. 7.16 · last amended August 5, 2025 · read from BC Laws on November 17, 2026
The text
(1) A person must not, without an overload permit, drive or operate on a highway a vehicle loaded or configured so that
(a) the gross weight on an axle exceeds the manufacturer's rated capacity for that axle or for the brake or suspension system with which the axle is equipped,
(b) the gross weight on an axle exceeds 9 100 kg,
(c) the gross weight on any one axle of a tridem axle or tandem axle exceeds 9 100 kg,
(d) the axle weight difference between adjacent axles exceeds 1 000 kg,
(e) except in the case of a tridem pole trailer, the gross weight on any two adjacent axles in a tridem axle exceeds 17 000 kg,
(f) the gross weight on the steering axle of an all-wheel-drive three axle truck tractor exceeds 7 500 kg, or
(g) the sum of the axle loads on the drive axles and jeep axle in a tandem drive truck tractor in combination with a single axle jeep and lowbed semi-trailer exceeds the greater of 24 000 kg or the weight allowed under the table in section 7.17.
(2) Subsection (1) does not apply to a vehicle described in section 19.11 (3) or (4) of the Motor Vehicle Act Regulations, B.C. Reg. 26/58.
(3) Despite anything in an overload permit, if a posted sign on a highway restricts vehicles by weight, the posted restriction applies.
Read the Commercial Transport Regulations on BC Laws ↗
Made under Commercial Transport Act, RSBC 1996, c. 58.