Antisapstain Chemical Waste Control Regulation, B.C. Reg. 300/90
Section 11
Management of sludges and wood residue
Cite as Antisapstain Chemical Waste Control Regulation, B.C. Reg. 300/90, s. 11 · last amended July 8, 2004 · read from BC Laws on November 17, 2026
The text
(1) Sludges that qualify as hazardous waste and that have originated from antisapstain chemical dip tanks and spray system filtering or screening processes shall not be incinerated, buried or otherwise disposed of or introduced into the environment unless all provisions of the Hazardous Waste Regulation are satisfied.
(2) Trim ends, broken lumber, chips, sawdust, planer shavings and other wood residue resulting from processing and handling of wood following its treatment with antisapstain chemicals
(a) shall not be provided to a person for use as mulch or for burning in a residential fireplace, stove or other burning device other than an incinerator permitted under paragraph (b),
(b) shall be incinerated only in a hog fuel burning incinerator, or other incineration device, that is designed
(i) to burn the wood residue at a minimum combustion temperature of 900C, and
(ii) for gases in the combustion zone to have a minimum residence time of one second, and
(c) if the antisapstain chemical is a chlorophenol, shall not be provided to a person for the purpose of supplying digesters in pulp manufacturing processes.
Read the Antisapstain Chemical Waste Control Regulation on BC Laws ↗
Made under Environmental Management Act, SBC 2003, c. 53.