Renewable Energy Projects Regulation, B.C. Reg. 28/2026

Section 24

Wind energy projects — setbacks

Cite as Renewable Energy Projects Regulation, B.C. Reg. 28/2026, s. 24 · last amended September 14, 2026 · read from BC Laws on November 17, 2026

The text

(1) In this section, “total height”, in relation to a wind turbine, means the sum of the hub height and the blade length. (2) A permit holder for a wind energy project must, unless the permit specifies other setback requirements, ensure that wind turbines are located as follows: (a) from a resource road, at least the sum of the blade length and 10 m; (b) from a road regularly travelled by the public, at least the product of 1.1 and the total height of the turbine; (c) from a property not associated with the project, at least the product of 1.1 and the total height of the turbine; (d) from a regularly occupied building, other than a building associated with the project, the product of 2 and total height of the turbine. (3) Subsection (2) (a) does not apply in relation to a resource road that is solely associated with the project. (4) A distance specified in subsection (2) is to be measured from the centre of the base of a wind turbine.
Read the Renewable Energy Projects Regulation on BC Laws ↗

Made under Energy Resource Activities Act, SBC 2008, c. 36.